MAX532ACPE+, ЦАП, прецизионный, 12 бит, SPI, 11.4В до 16.5В, DIP, 16 вывод(-ов)
- Производитель
- Maxim Semiconductor
Цена 2 160 руб. за 1 шт
Количество- Полное описание
The MAX532ACPE+ is a dual, serial input, voltage output, 12bit multiplying digital to analogue converter (MDAC) in 16 pin DIP package. This MDAC comes with output amplifiers, no external user trims required to achieve full specified performance. The 3 wire serial interface of device minimizes the number of package pins, so it uses less board space than parallel-interface parts. Serial interface minimizes digital noise feedthrough from its logic pins to its analogue outputs and also simplifies opto-coupler isolated or transformer isolated applications.
• Supply voltage range is ±11.4V to ±16.5V
• Operating temperature range from 0°C to 70°C
• All logic inputs are TTL and CMOS compatible
• SPI, QSPI and Microwire compatible
• Monotonic over temperature, Power-on reset
• Low gain temperature coefficient of ±2ppm/°C
• Settling time to ±1/2LSB is 2.5µs, slew rate of 8V/µs
• Differential nonlinearity of ±1LSB, relative accuracy of ±1/2LSB
• Output swing of ±12V, Fast, 6MHz 3 wire interface
• Output current of ±10mA
Полупроводники - Микросхемы\Преобразование Сигналов и Данных\Цифро-аналоговые Преобразователи - ЦАП
Технические параметры
Минимальная Рабочая Температура | 0 C |
Максимальная Рабочая Температура | 70 C |
Количество Выводов | 16вывод(-ов) |
Диапазон Напряжения Питания | 11.4В до 16.5В |
Разрешение (бит) | 12бит |
Стиль Корпуса АЦП / ЦАП | dip |
Тип Входного Канала | последовательный |
Интерфейс Данных | spi |
Вес, г | 1.116 |