MAX5986AETE+, POE контроллер, IEEE 802.3af, Class-1 -2, 60В вход, 35.7В блокировка по недостаточному напряжению

The MAX5986AETE+ from Maxim Integrated Products is an IEEE 802.3af-compliant, high-efficiency, Class 1/Class 2, PDs with integrated DC to DC converter in 16 pin TQFN package. It provides a complete power-supply solution as IEEE® 802.3af-compliant Class 1/Class 2 powered devices in a Power over Ethernet system. The device integrates the PD interface with an efficient DC to DC converter, offering a low external part count PD solution. The MAX5986A include sleep and ultra-low power modes. The PD interface provides a detection signature and a Class 1/Class 2 classification signature with a single external resistor. The PD interface also provides an isolation power MOSFET, a 60mA (max) inrush current limit and a 323mA operating current limit. The integrated step down DC-DC converter uses a peak current-mode control scheme and provides an easy-to implement architecture with a fast transient response. It operates at a fixed 215KHz switching frequency.

• Wide input voltage range from 8.7V to 60V
• Protects against overload, output short circuit, output overvoltage and overtemperature
• Integrated TVS diode withstands cable discharge event (CDE)
• PoE class 1/class 2 classification set with single resistor
• Intelligent maintain power signature (MPS) complies with IEEE 802.3af specification
• Simplified wall adapter interface
• Pass 2KV, 200m CAT-6 cable discharge event
• Sleep and ultra low power mode
• Frequency foldback for high-efficiency light-load operation, Back-bias to optimize efficiency
• Hiccup-mode runaway current limit, 49mA (typ) inrush current limit

Полупроводники - Микросхемы\Микросхемы Управления Питанием\Power-over-Ethernet (POE) Контроллеры

Технические параметры