FT240XQ-T, USB интерфейс, USB-FIFO, USB 2.0, 2.97 В, 5.5 В, QFN, 24 вывод(-ов)

The FT240XQ is an USB 2.0 Full-speed IC, offers a compact bridge to 8-bit wide FIFO interfaces. The device is a FIFO, capable of operating up to 1Mbps, with low power consumption (8mA). The IC includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a 8-bit wide FIFO interface.

• Entire USB protocol handled on chip, no USB specific firmware programming required
• Fully integrated 2048-byte MTP memory for storing device descriptors and CBUS I/O configuration
• Fully integrated clock generation with no external crystal required
• Data transfer rates to 1Mbps
• 512-byte receive buffer and 512-byte transmit buffer utilising buffer smoothing technology
• FTDI's royalty-free virtual com port (VCP) and direct (D2XX) drivers
• Configurable CBUS I/O pins
• Transmit and receive LED drive signals
• Synchronous and asynchronous bit bang interface options with RD# and WR# strobes
• Battery charger detection
• Device supplied pre-programmed with unique USB serial number
• Supports bus powered, self powered and high-power bus powered USB configurations
• Integrated +3.3V level converter for USB I/O
• True 3.3V CMOS drive output and TTL input
• Configurable I/O pin output drive strength
• Integrated power-on-reset circuit
• Low USB bandwidth consumption
• UHCI/OHCI/EHCI host controller compatible
• USB 2.0 full-speed compatible
• Extended operating temperature range

Полупроводники - Микросхемы\Драйверы и Интерфейсы\USB Интерфейсы

Технические параметры