MAX3656ETG+T, Драйвер лазерного диода, лазерный диод, 2.5Гб/с, 3В до 3.6В, TQFN-24
- Производитель
- Maxim Semiconductor
Цена 110 руб. за 1 шт
Количество- Полное описание
The MAX3656ETG+T is a 155Mbps to 2.5Gbps burst mode laser driver in 24 pin TQFN package. The laser driver accepts either positive referenced emitter coupled logic (PECL) or current mode logic (CML) data inputs and provides bias and modulation current for the laser diode. The device can switch laser diode from a completely dark (off) condition to a full (on) condition (with proper bias and modulation currents) in less than 2ns. The MAX3656 incorporates DC coupling between laser driver and laser diode and operates with a single supply voltage as low as +3V. A digital automatic power control (APC) loop is provided to maintain average optical power over full temperature range and lifetime. The APC loop is functional for a minimum burst on-time of 576ns and minimum burst off-time of 96ns with no limit on the maximum burst on- or off-time. It is used in passive optical network (PON) transmitters, fibre to the-home (FTTH) and fibre to the-business (FTTB) broadband access systems.
• Supply voltage range is 3V to 3.6V
• Operating temperature range from -40°C to +85°C
• Burst on-time of 576ns to infinity
• Infinite bias-current hold time between bursts
• Typical supply current of 40mA
• Programmable bias current from 1mA to 70mA
• Programmable modulation current from 10mA to 85mA
• Automatic average power control with failure monitor (no CAPC capacitor needed)
• APC loop initialization <,=3 bursts
Полупроводники - Микросхемы\Драйверы и Интерфейсы\Лазерные Диодные Драйверы
Технические параметры
Максимальное Напряжение Питания | 3.6В |
Минимальное Напряжение Питания | 3В |
Количество Выводов | 24вывод(-ов) |
Стиль Корпуса Привода | TQFN |
Тип Лазерного Привода | Лазерный Диод |
Вес, г | 0.04 |